Ceramic Foam Filter For Molten Aluminium

Views : 1242
Update time : 2016-12-27 18:08:45

Alumina Ceramic Foam Filters mainly for filtration of molten aluminium and molten aluminium alloys in foundries and cast houses. With their excellent resistance to attack and corrosion from molten aluminum, they can effectively remove inclusions, reduce trapped gas and provide laminar flow, and then the filtered metal is significantly cleaner. Cleaner metal results in higher-quality castings, less scrap, and fewer inclusion defects, all of which contribute to bottom-line profit. 
Alumina Ceramic Foam Filters(CFF-AL) Common Size: 

CFF-AL is available in all common sizes: 7", 9", 12", 15", 17", 20", and 23". We offers the whole range of porosities from PPI 10 up to PPI 60 (PPI = pores per inch). Custom-made cut-to-size filters are also possible.

Alumina Ceramic Foam Filters (CFF-AL) Gasketing:

CFF-AL is equipped with a gasket on the edges. The gasket assures the proper and tight position of the filter within the filter box. There are different types of gasket available, eg. Ceramic fibre gasket etc. Also you can choose CFF-AL without gasket.           

Physical Properties for Alumina Ceramic Foam Filters (CFF-AL):

Working

≤1200°C

Porosity

80~90%

Compression Strength (Room Temperature)

≥1.0Mpa

Volume Density

≤0.5g/cm3

Thermal Shock Resistance

800°C---room temperature 5 times

Application

non-ferrous and alumina alloys, 
high temperature gasfilter,
chemical fillings and catalysis carrier etc.

Chemical Composition for Alumina Ceramic Foam Filters (CFF-AL):

Al2O3

SiC

SiO2

ZrO2

Others

80~82%

---

5~6%

---

12~15%